Surenhap Soil pH Meter, 3-in-1 Humidity Sensor Meter / Sunlight / Soil pH Test
1.Functions: You can know when to water the plant, and if it has enough sunlight, you can also test the pH level in the soil that can adjust the pH to an appropriate level by using this 3-in-1 moisture meter.
2.Easy to use: this 3-in-1 moisture meter with light and ph test function does not need batteries, and you can use it indoors or outdoors. Insert the probe into the ground about 2-4 inches, then change the switch to the tester what you want to measure.
3.Precision reading: Humidity range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet), Relative Light: 0-2000lux (0-200 Low, 200-500 Low +, 500- 1000 Nor, 1000-2000 High), pH range: 3.5-8ph (3.5-6.5 Acid, 7-8 Alkaline).
4.Interior / exterior design: it is lightweight and portable design, convenient for indoor and outdoor use
5. Wide use: This 3-in-1 soil moisture meter is the ideal soil test kit for the care of plants, home and garden, lawn, farm.
Humidity / pH / sunlight meter Surenhap 3-in-1 – Plant Care Helper
This 3-in-1 soil moisture meter is designed to better understand the condition of your plant, monitor soil moisture.
Help you control the acidity of the soil and see if the plant receives enough sunlight to make the plants grow healthier.
Humidity range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet).
Relative light: 0-2000 lux (0-200 Low, 200-500 Low +, 500-1000 Nor, 1000-2000 Hgh).
PH range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline).
Product size: 11.2 x 2.0 x 1.3 inches.
Probe length: 7.9 inches.
Distance between probes: 0.5 inches.
Copper probe diameter: 5 mm.
Aluminum probe diameter: 5 mm.
Package Weight: 2 oz / 56g; 13 * 4 * 1.7 in
How to use:
Step 1: toggle the switch to the humidity / pH / light position.
Step 2: Stick the probe on the floor about 2-4 inches.
Step 3: Adjust the position of the probe until the dial pointer oscillates slightly.
Step 4: After 10 minutes, read the humidity / pH / light level on the dial.
Step 5: remove the probe from the floor and clean it after each use.
Keep in mind:
1. Do not insert it into very hard ground or touch hard objects when inserting it into the ground.
2. Do not use it to test pure water or other liquid, the electrolytic response rate will be affected, it can only be used to measure the soil.
3. Clean and clean the probe after each use.
163 total views, 1 today