Supports hardware flow control used to implement the CISCO break sequence.
RJ45 DTE Pinouts RTS(1), DTR(2), TXD (3), GND(4), GND(5), RXD (6), DSR(7), CTS(8).
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Cable length is 1.80m (6 feet). USB 2.0 Full Speed compatible.
Connect from a USB port on your laptop directly to a Cisco console port. No adapters needed!
Fully capable of sending a break key sequence.
Embedded FTDI chip.
Windows 7 and 8 will automatically install drivers, no need for additional drivers or install CD’s (no CD included). Drivers available for download for all versions.
Support Android, Support Win 8, Win 7, XP, 2000, Linux, Mac OS.
Support EEPROM, support Mprog3.5.
Support FTDI VCP driver and D2XX driver.
Upgrading for Cisco DB9 RJ45 console cable.
196 total views, 1 today